GOST 24379.0-2012 PDF

Full title and description

GOST 24379.0-2012 — Foundation bolts. General specifications (Russian: ГОСТ 24379.0-2012 «Болты фундаментные. Общие технические условия»). This standard establishes the general technical requirements, quality and conformity rules, marking, packaging and documentation principles applicable to foundation (anchor) bolts used for fastening structural elements and equipment to foundations.

Abstract

GOST 24379.0-2012 defines the general provisions for foundation (anchor) bolts: scope of application, referenced standards, material and mechanical property requirements, corrosion protection (coatings), testing and inspection rules, marking, packaging and storage. It is a general-part document intended to be used together with the related dimensional and construction parts of the GOST 24379 series.

General information

• Status: Active / in force (replaced GOST 24379.0-80).
• Publication date: Approved 2012 (designation year 2012); published / entered into force 1 July 2013.
• Publisher: Issued as a GOST interstate standard under the Russian standards system (published through the national standards authorities / Rosstandart / Interstandard channels).
• ICS / categories: 21.060.10 — Mechanical systems and components for general use; Fasteners (bolts, screws, studs).
• Edition / version: GOST 24379.0-2012 (first edition under the 2012 revision series).
• Number of pages: ~15 pages (published electronic edition; typical vendor listings show 13–15 pages depending on format).

Scope

This standard applies to foundation (anchor) bolts used to secure building structures and equipment to concrete or other foundations. It sets out the general technical requirements and quality control provisions to be observed by manufacturers, suppliers and users, and is intended to be used together with the companion parts of the GOST 24379 series that specify construction, dimensions and specific types of foundation bolts.

Key topics and requirements

• Definitions and classification of foundation (anchor) bolts and related elements.
• Reference to related dimensional and construction parts of the GOST 24379 series.
• Material requirements and permissible grades for bolt components (steel types and chemical/mechanical property expectations).
• Mechanical properties and strength classes; requirements for heat treatment where applicable.
• Dimensional tolerances and interchangeability principles (used in conjunction with the dimensional part GOST 24379.1-2012).
• Corrosion protection and coatings (galvanizing, passivation, special coatings) and acceptance criteria.
• Testing and inspection procedures: dimensional checks, mechanical testing, coating and corrosion resistance tests.
• Marking, labelling and traceability requirements for supplied bolts.
• Packaging, storage and transport requirements to preserve conformity.

Typical use and users

Primarily used by manufacturers of anchor and foundation bolts, designers and structural engineers specifying anchor systems for buildings and machinery, procurement specialists, construction contractors, quality and inspection bodies, and certification/standards departments. It is referenced in design documentation, technical specifications for supply, and conformity assessment of fasteners used in foundations and heavy-equipment anchoring.

Related standards

Key related documents include other parts of the GOST 24379 series — notably GOST 24379.1-2012 (Foundation bolts — Structure and dimensions) — and the earlier superseded edition GOST 24379.0-80. Other national or sector standards on fasteners and coatings or testing methods may be cited within the standard as normative references.

Keywords

foundation bolts, anchor bolts, fasteners, GOST, anchor rods, dimensions, materials, coatings, marking, testing, mechanical properties

FAQ

Q: What is this standard?

A: GOST 24379.0-2012 is the general-specifications part of the GOST series for foundation (anchor) bolts; it provides the overarching technical requirements, quality and conformity rules that apply across the series.

Q: What does it cover?

A: It covers general technical provisions for foundation bolts including materials, mechanical properties, corrosion protection, testing and inspection, marking, packaging and related quality requirements. Specific dimensions and constructions are specified in companion parts (for example, GOST 24379.1-2012).

Q: Who typically uses it?

A: Manufacturers, structural designers, civil and mechanical engineers, procurement and quality assurance teams in construction and industrial equipment sectors, and conformity/inspection bodies.

Q: Is it current or superseded?

A: The 2012 edition is the current (in-force) version of the general specifications part; it superseded the older GOST 24379.0-80. Users should check national registries or the issuing authority for any later amendments when applying the standard.

Q: Is it part of a series?

A: Yes — it is the general (0) part of the GOST 24379 series on foundation bolts; other parts (for example, GOST 24379.1-2012) cover structure, dimensions and specific types.

Q: What are the key keywords?

A: Foundation bolts, anchor bolts, fasteners, GOST 24379, materials, coatings, testing, dimensions, marking.