DIN EN ISO 13628-15 2012-01 PDF

Full title and description

STB DIN EN ISO 13628-15 2012-01 — Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds. (German title: Erdöl- und Erdgasindustrie — Auslegung und Betrieb von Unterwasser-Produktionssystemen — Teil 15: Unterwasser-Aufbauten und Verteilerstücke.) This is the DIN/EN adoption of ISO 13628-15 (ISO 13628-15:2011) issued in the EN/DIN collection in January 2012.

Abstract

This part of ISO 13628 provides recommendations and specific requirements for the design, materials, structural arrangement, piping and interfaces of subsea structures and manifolds used for pressure control in subsea oil and gas production and subsea injection services. It covers subsea manifolds, templates (single-satellite and multiwell), subsea processing and boosting stations, flowline/riser bases, pipeline end manifolds (PLEM) and terminations (PLET), T- and Y-connections, and subsea isolation valves (SSIV). The document is intended to sit within the framework of other industry specifications and does not override mandatory requirements from other standards or regulations.

General information

• Status: Published (DIN EN ISO edition Jan 2012). Note: the underlying ISO record for ISO 13628-15:2011 is listed by ISO as Withdrawn; users should confirm current national adoption or replacement status with the relevant standards body.
• Publication date: January 2012 (DIN/EN edition; original ISO edition dated 2011).
• Publisher: Deutsches Institut für Normung (DIN) — English version as EN ISO 13628-15 (based on ISO 13628-15:2011).
• ICS / categories: 75.180.10 (Exploratory, drilling and extraction equipment; oil & gas industries).
• Edition / version: Edition 1 — ISO 13628-15:2011; published as DIN EN ISO 13628-15 in January 2012.
• Number of pages: Common listings for the DIN/EN PDF show ~80 pages (some ISO records list a differing page count for the ISO edition — verify the publisher PDF for the exact page count for the version you purchase).

Scope

ISO/DIN EN ISO 13628-15 covers design and operation-related recommendations for subsea manifolds, templates and associated subsea structures used to control, distribute or isolate flows in subsea production and injection systems. It applies to structural components and piping systems of subsea production systems, including production and injection manifolds, modular and integrated templates, subsea processing and boosting stations, flowline and export riser bases, PLEM and PLET, T- and Y-connections, and subsea isolation valves. The standard explicitly excludes detailed requirements for pipeline and manifold valves, flowline and tie-in connectors, choke valves and production control systems where other standards apply.

Key topics and requirements

• Functional definitions and typical configurations of subsea structures and manifolds (manifold types, templates, PLEM/PLET arrangements).
• Structural design principles for subsea templates and support structures, including load cases, fatigue and strength considerations.
• Piping arrangement, layout and routing recommendations for production/injection manifolds and connections.
• Materials selection and corrosion protection strategies appropriate for subsea service environments.
• Interfaces, connection details and requirements for tie-ins, T/Y connections, and interfaces with trees, flowlines and risers.
• Inspection, testing and verification requirements (pressure testing, NDT, installation checks) and recommended documentation.
• Operational considerations for subsea processing/boosting stations and requirements for protection structures and installation geometry.
• Limitations and exclusions — identifies equipment and systems (e.g., specific valves, control systems) covered by other standards.

Typical use and users

This standard is used by subsea and offshore engineers, structural and piping designers, EPC contractors, operators and project managers involved in the design, procurement and installation of subsea production systems. It is used during concept and detailed design phases, in contract specifications, for vendor assessments and for establishing inspection and testing regimes for subsea manifolds, templates and associated structures.

Related standards

ISO 13628-15 is part of the broader ISO 13628 series (design and operation of subsea production systems) and should be considered alongside other parts of that series (for example parts covering wellhead and tree equipment, control systems, umbilicals, subsea pipelines and risers). Relevant companion documents and industry references include other ISO 13628 parts, applicable EN/BS/DIN adoptions, and sector technical references such as ASME B31.3 (process piping) and applicable ASTM/industry test methods where normative references are called out.

Keywords

subsea, manifold, template, subsea structures, PLEM, PLET, SSIV, subsea processing, boosting station, flowline, riser base, offshore, ISO 13628, DIN EN ISO, manifolds

FAQ

Q: What is this standard?

A: DIN EN ISO 13628-15 (2012-01) is the German/European adoption of ISO 13628-15:2011 covering subsea structures and manifolds — design and operational recommendations for subsea production and injection manifolds and related structures.

Q: What does it cover?

A: It covers structural and piping components of subsea manifolds and templates, subsea processing and boosting stations, flowline and riser bases, pipeline end manifolds/terminations, T- and Y-connections and subsea isolation valve arrangements, along with associated design, materials, inspection and testing recommendations. It does not replace specialized standards for valves, connectors or control systems where separate standards apply.

Q: Who typically uses it?

A: Subsea/oil & gas engineers, EPC contractors, operators, procurement/specification authors, inspection and testing teams, and standards committees involved in subsea production system projects.

Q: Is it current or superseded?

A: The DIN/EN publication was issued in January 2012 (based on ISO 13628-15:2011). Note: the ISO record for ISO 13628-15:2011 is shown as Withdrawn on the ISO lifecycle registry — national adoptions (DIN/EN) can have differing lifecycle timelines. Before relying on this text for a live project, confirm the current status (active, withdrawn or superseded) with DIN, ISO or your national standards body and obtain the latest applicable edition.

Q: Is it part of a series?

A: Yes — it is one part of the ISO 13628 series (Design and operation of subsea production systems). The series contains multiple parts addressing wellheads, trees, control systems, umbilicals, pipelines/risers and other subsea equipment; use the relevant part(s) together for comprehensive coverage.

Q: What are the key keywords?

A: Subsea, manifold, template, PLEM, PLET, subsea structure, SSIV, subsea processing, boosting station, ISO 13628.