ISO 10360-6-2001 cor1-2007 PDF

Full title and description

Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6: Estimation of errors in computing Gaussian associated features — Technical Corrigendum 1 (ISO 10360-6:2001/Cor 1:2007). This corrigendum provides corrections and clarifications to the original ISO 10360-6:2001 text related to the estimation and testing of errors when computing Gaussian (least-squares) associated geometric features from coordinate measurement data.

Abstract

This document is a technical corrigendum to ISO 10360-6:2001 that corrects editorial errors and clarifies test descriptions and formulae used when assessing software and systems that compute Gaussian associated features (line, plane, circle, sphere, cylinder, cone, torus) from coordinate measurements. It does not replace the main standard but amends it; the corrigendum itself is published as a one-page correction.

General information

• Status: Published (Technical Corrigendum to ISO 10360-6:2001).
• Publication date: 2007 (corrigendum published May 2007; effective publication and distribution dates recorded as 26 April 2007 / May 2007 in various catalogues).
• Publisher: International Organization for Standardization (ISO).
• ICS / categories: 17.040.30 (Measuring instruments).
• Edition / version: Edition 1 — Corrigendum to ISO 10360-6:2001 (ISO 10360-6:2001/Cor 1:2007).
• Number of pages: 1 (corrigendum document).

Scope

The corrigendum applies to ISO 10360-6:2001 and addresses corrections and clarifications needed for the part of the ISO 10360 series that specifies acceptance and reverification tests for coordinate measuring machines related to the estimation of errors in computing Gaussian associated features. It ensures the test procedures and formulae for evaluating software and CMM performance in computing associated geometry are unambiguous and consistent with the intent of the original part 6.

Key topics and requirements

• Clarifications and editorial corrections to formulae, definitions and test descriptions in ISO 10360-6:2001.
• Precise scope: verification/testing of software routines that compute Gaussian (least-squares) associated features (line, plane, circle, sphere, cylinder, cone, torus).
• Alignment of the text with EN/CEN implementation where applicable (EN ISO corrigenda / AC versions issued for CEN adoption).
• Intended to be used alongside the full ISO 10360-6:2001 standard; it does not stand alone as a replacement.

Typical use and users

Used by metrology laboratories, CMM manufacturers, software developers for coordinate measurement and associated-feature fitting, quality engineers, and conformity assessment bodies performing acceptance tests and periodic reverification of CMMs. The corrigendum is consulted when implementing or interpreting the test procedures and calculation methods of ISO 10360-6:2001.

Related standards

This corrigendum is tied to ISO 10360-6:2001 (Part 6) and is part of the wider ISO 10360 series (acceptance and reverification tests for CMMs and CMSs), which includes other parts addressing probe form errors, probing spheres, multiprobe systems, imaging and optical sensors and more. It is also represented in EN/CEN adoption documents (EN ISO 10360-6 corrigendum/AC). For the series and committee handling, see ISO/TC 213 and the ISO 10360 family.

Keywords

ISO 10360, corrigendum, CMM, coordinate measuring machine, Gaussian associated features, least-squares fitting, acceptance test, reverification, geometric product specification, metrology.

FAQ

Q: What is this standard?

A: It is a technical corrigendum (ISO 10360-6:2001/Cor 1:2007) that corrects and clarifies elements of ISO 10360-6:2001, the part of ISO 10360 dealing with estimation of errors in computing Gaussian associated features for CMMs.

Q: What does it cover?

A: It covers editorial corrections and clarifications to the procedures, formulae and descriptions used to test software and systems that compute associated geometric features (line, plane, circle, sphere, cylinder, cone, torus) from coordinate measurement data using Gaussian (least-squares) methods. It amends but does not replace the main Part 6 text.

Q: Who typically uses it?

A: Metrology labs, CMM manufacturers, developers of measurement and evaluation software, quality/control engineers and certification bodies that implement acceptance and reverification testing for coordinate measuring machines.

Q: Is it current or superseded?

A: The document is a corrigendum published in 2007 to the 2001 edition. The underlying ISO 10360-6:2001 edition has been subject to periodic review and was confirmed in ISO records (most recently reviewed/confirmed in ISO lifecycle entries); the corrigendum remains the official correction to that 2001 edition. Users should check the current status of the base part in ISO catalogues for any later revisions or replacements.

Q: Is it part of a series?

A: Yes — it is part of the ISO 10360 series (multiple parts addressing different CMM/CMS acceptance and reverification tests). The series is maintained by ISO/TC 213 (Geometrical Product Specifications and verification).

Q: What are the key keywords?

A: CMM, ISO 10360-6, corrigendum, Gaussian associated features, least-squares fitting, acceptance test, reverification, metrology.