GOST 33436.3-2-2015 PDF

Full title and description

GOST 33436.3-2-2015 — "Совместимость технических средств электромагнитная. Системы и оборудование железнодорожного транспорта. Часть 3‑2. Железнодорожный подвижной состав. Аппаратура и оборудование. Требования и методы испытаний" (English: Electromagnetic compatibility of technical equipment. Railway systems end equipment. Part 3‑2: Railway rolling stock — Apparatus and equipment. Specifications and test methods).

Abstract

This interstate (GOST) standard sets emission limits and immunity requirements and specifies test methods for apparatus and equipment intended for use on railway rolling stock. It is a national/adopted implementation (modified) of the IEC 62236‑3‑2 series requirements adapted for application across participating states of the GOST/EASC framework. The document covers both radiated and conducted phenomena and practical test procedures used to verify compliance.

General information

• Status: Active / introduced (interstate standard in force as a national standard in participating states).
• Publication date: Designation year 2015 (GOST 33436.3-2-2015); officially registered and introduced for national application with entry into force commonly listed as 1 October 2016. Some registries list initial adoption/registration dates in August 2015.
• Publisher: Adopted and approved through the interstate standardization process (Interstate Council for Standardization, Metrology and Certification — EASC) and introduced by the Federal Agency for Technical Regulation and Metrology (Rosstandart) as the national implementing authority where applicable.
• ICS / categories: Railway engineering / EMC classifications (commonly listed under ICS 45.020 and related transport/telecommunications classifications).
• Edition / version: First introduction as GOST 33436.3-2-2015 (modified adoption of IEC 62236‑3‑2).
• Number of pages: Commonly listed as 39–41 pages depending on the published file/format (catalog listings typically show 39 pages).

Scope

Applies to apparatus and equipment installed on railway rolling stock and specifies limits, immunity criteria and test methods to ensure electromagnetic compatibility (EMC) between on‑board equipment and the railway environment. The standard addresses both emissions from equipment and the immunity of equipment to typical electromagnetic disturbances encountered in railway service, and it is intended for use by designers, manufacturers, test laboratories and regulatory bodies involved in rolling stock EMC compliance.

Key topics and requirements

• Defined emission limits for radiated and conducted disturbances from on‑board apparatus and equipment.
• Immunity requirements for equipment against common railway disturbances (radiated fields, conducted disturbances, electrostatic discharge, surge/transients, power‑supply variations and magnetic fields typical for railway environments).
• Test methods and measurement procedures for both laboratory and on‑vehicle testing, including instrumentation, test set‑ups and performance criteria.
• Classification of equipment types and application-specific requirements for rolling stock components.
• Modifications and national deviations from the referenced IEC 62236‑3‑2 technical content where noted in the standard's introduction.

Typical use and users

Used by rolling stock designers and manufacturers, EMC test laboratories, certification and conformity assessment bodies, railway operators, maintenance organisations and procurement teams to specify, verify and demonstrate EMC compliance of on‑board equipment and subsystems. It supports type‑approval, commissioning tests and troubleshooting of EMC issues on trains.

Related standards

This document is part of the GOST 33436 series for railway EMC and is aligned with the IEC 62236 family. Closely related parts include GOST 33436.1‑2015 (general provisions), GOST 33436.3‑1‑2015 (other rolling stock equipment), GOST 33436.2 (infrastructure/environment interaction) and other part‑specific documents that cover system‑level and environmental EMC requirements and test methods.

Keywords

EMC, electromagnetic compatibility, rolling stock, railway equipment, emissions, immunity, test methods, IEC 62236‑3‑2, GOST 33436 series, radiated emissions, conducted emissions, electrostatic discharge, surge immunity.

FAQ

Q: What is this standard?

A: GOST 33436.3‑2‑2015 is an interstate (GOST) standard that specifies electromagnetic compatibility requirements and test methods for apparatus and equipment intended for railway rolling stock. It is a national/adopted implementation of the corresponding IEC document with listed national modifications.

Q: What does it cover?

A: It covers permissible levels of electromagnetic emissions from on‑board equipment, immunity criteria for equipment in the railway environment, and the measurement and test procedures needed to assess compliance (radiated and conducted measurements, immunity tests such as ESD and surge, and performance criteria).

Q: Who typically uses it?

A: Equipment and rolling stock designers and manufacturers, EMC test laboratories, certification bodies, railway operators and maintenance organisations — essentially anyone responsible for ensuring the EMC performance of apparatus installed on rail vehicles.

Q: Is it current or superseded?

A: As of listed registries and catalogue entries, GOST 33436.3‑2‑2015 is an active/introduced standard (entered into force commonly on 1 October 2016 as the national implementation after adoption in 2015). No widely published superseding GOST for Part 3‑2 has been indicated in the referenced registries. Users should confirm the current status in their national registry before reliance.

Q: Is it part of a series?

A: Yes — it is part of the GOST 33436 series for electromagnetic compatibility of railway systems and equipment, and it corresponds to the IEC 62236 family (railway EMC standards).

Q: What are the key keywords?

A: EMC, rolling stock, emissions, immunity, test methods, IEC 62236‑3‑2, railway equipment.