GOST R 51616-2000 PDF

Full title and description

GOST R 51616-2000 — National standard of the Russian Federation establishing requirements and test methods for the routine testing and quality control of asbestos-cement products (pipes, fittings and related items) used in water supply, sewerage and drainage systems.

Abstract

This standard specifies technical requirements, sampling and testing procedures, inspection rules and acceptance criteria for asbestos-cement products intended for pressure and gravity pipelines and related applications. It addresses material properties, dimensional tolerances, mechanical strength, water absorption, and workmanship to ensure reliable performance in civil and industrial water-handling systems.

General information

• Status: National standard (GOST R) — published and in force as of adoption in 2000; users should check for any later amendments or replacements.
• Publication date: 2000
• Publisher: Federal Agency on Technical Regulating and Metrology of the Russian Federation (or the national standards body responsible for GOST R)
• ICS / categories: 01.080.01 (Materials for construction); 91.080 (Water supply; sewerage)
• Edition / version: Original GOST R 51616-2000 edition
• Number of pages: Typically 10–30 pages (exact count varies by published copy; many GOST documents of this type are about 12–24 pages)

Scope

This standard applies to asbestos-cement pipes, fittings and related products manufactured for use in water supply, sewerage and drainage systems. It sets the scope of testing and quality control procedures covering dimensions, mechanical strength (ring stiffness, bending, impact), water permeability and absorption, chemical resistance, and surface quality to ensure products meet operational requirements and safety limits for installation and service.

Key topics and requirements

• Definitions and classification of asbestos-cement products by intended use and dimensions.
• Requirements for raw materials and composition, including acceptable asbestos content and cement matrix specifications.
• Dimensional tolerances for outer diameter, wall thickness, length and fitting interfaces.
• Mechanical performance tests: ring stiffness, bending strength, impact resistance and pressure/impermeability checks where applicable.
• Water absorption and permeability limits to ensure low porosity and long-term durability.
• Sampling procedures and frequency for factory and type testing.
• Inspection, marking, packaging, storage and transport requirements to preserve product integrity.
• Acceptance criteria and methods for dealing with nonconforming lots.

Typical use and users

Engineers, quality managers and production personnel at manufacturers of asbestos-cement pipes and fittings, procurement specialists and technical inspectors for water utilities, municipal infrastructure designers, construction contractors, and regulatory bodies performing product certification and conformity assessment use this standard as the basis for production controls, acceptance testing and procurement specifications.

Related standards

Related GOST and GOST R standards cover asbestos-cement building materials, testing methods for cementitious products, and standards for water pipelines and fittings. These may include standards for sampling and testing cement composites, product marking and conformity certification procedures, and sector-specific norms for potable water and sewerage systems. Users commonly reference other national or regional standards for complementary test methods.

Keywords

asbestos-cement, pipes, fittings, water supply, sewerage, drainage, quality control, testing methods, dimensional tolerances, mechanical strength, water absorption, GOST R 51616-2000

FAQ

Q: What is this standard?

A: GOST R 51616-2000 is a Russian national standard that specifies requirements and test methods for asbestos-cement pipes, fittings and related products used in water supply, sewerage and drainage systems.

Q: What does it cover?

A: It covers definitions, material and dimensional requirements, mechanical and physical tests (such as ring stiffness, bending strength and water absorption), sampling procedures, inspection, marking, packaging and acceptance criteria for asbestos-cement products.

Q: Who typically uses it?

A: Manufacturers of asbestos-cement products, quality and production engineers, laboratory technicians performing tests, procurement and inspection authorities for water and sewerage infrastructure, and certification bodies.

Q: Is it current or superseded?

A: The document was published in 2000. Users should verify with the national standards body whether it remains current, has been amended, or has been superseded by later GOST/GOST R standards or technical regulations.

Q: Is it part of a series?

A: It is part of the GOST R system of national standards and is typically used alongside other standards on asbestos-cement materials, testing methods for cementitious products, and pipeline standards covering installation and materials for water and sewer systems.

Q: What are the key keywords?

A: asbestos-cement, pipes, fittings, water supply, sewerage, testing, quality control, GOST R 51616-2000