GOST R 55510-2013 PDF

Full title and description

GOST R 55510-2013 — Pipeline valves. Drives of rotary action. The connecting dimensions. The standard specifies types of actuator-to-valve attachments and the corresponding connecting dimensions for rotary (multi-turn and part-turn) actuators and gearboxes used with pipeline valves.

Abstract

National Russian standard issued in 2013 that established connecting-interface dimensions for rotary actuators (electric, pneumatic, hydraulic and gear-reduction drives) used to operate pipeline valves. It was intended to harmonize actuator–valve mechanical interfaces and referenced relevant international documents in its development.

General information

• Status: Withdrawn / cancelled — officially removed from force in 2021 and superseded by an interstate standard.
• Publication date: Approved by Rosstandart on 20 August 2013; introduced into effect in early 2014 (effective date commonly given as 01 February 2014).
• Publisher: Federal Agency for Technical Regulation and Metrology (Rosstandart).
• ICS / categories: 23.060.01 (pipeline valves; hydraulic and pneumatic systems / valve hardware).
• Edition / version: 2013 (GOST R 55510-2013 — national edition based on industry draft).
• Number of pages: ~35–36 pages (published editions list 35 or 36 pages depending on publisher/format).

Scope

The standard applies to rotary actuators and actuating mechanisms (multi-turn and part-turn; electric, pneumatic, hydraulic, and gear reducers) intended to control pipeline valves. It establishes the types of attachments (interface types) between actuators and valves, the actuator connecting dimensions and the corresponding dimensions of valve attachment interfaces. The document was developed taking into account international practice and related ISO attachments standards.

Key topics and requirements

• Definition and designation of actuator–valve attachment types (interface families and labelling).
• Dimensional tables and tolerances for actuator mounting flanges, drive output shafts, coupling patterns and bolt circles.
• Nominal torque/axial load considerations for connection parts where specified (design intent for mechanical strength of interfaces).
• Compatibility guidance to help ensure interchangeability between actuators and valve bodies.
• Normative references to international standards and national technical background documents used in preparation.

Typical use and users

Used by valve manufacturers, actuator and gearbox designers, OEMs, pipeline and process plant engineering teams, procurement/specification authors, assembly and maintenance engineers, and conformity assessment bodies to ensure mechanical compatibility between actuators and pipeline valves during design, purchase and installation.

Related standards

Superseded by the interstate standard ГОСТ 34287-2017 (Pipeline valves. Drives of rotary action. Connecting dimensions), which aligns with relevant ISO actuator-attachment documents; related references include ISO 5210 / ISO 5211 family documents and earlier industry drafts (developer references such as ST ЦКБА 062-2009 are noted in preparatory material).

Keywords

pipeline valves; rotary actuators; actuator attachments; connecting dimensions; multi-turn; part-turn; valve interface; actuator flange; ISO 5210; ISO 5211.

FAQ

Q: What is this standard?

A: GOST R 55510-2013 is a Russian national standard that specified the connecting dimensions and types of mechanical attachments for rotary actuators used on pipeline valves.

Q: What does it cover?

A: It covers actuator-to-valve mechanical interfaces — attachment types, flange and shaft dimensions, bolt patterns and related dimensional requirements for multi-turn and part-turn drives (electric, pneumatic, hydraulic and gearboxes).

Q: Who typically uses it?

A: Valve and actuator manufacturers, plant engineers, designers, procurement specialists and maintenance teams use the standard to ensure mechanical interchangeability and to specify mounting interfaces in equipment procurement and engineering documentation.

Q: Is it current or superseded?

A: It has been officially cancelled (withdrawn) — Rosstandart published its cancellation with effect in 2021; the interstate standard ГОСТ 34287-2017 now serves as the applicable document for the same subject matter.

Q: Is it part of a series?

A: The topic forms part of broader valve and actuator interface standardization and is linked to international actuator-attachment standards (ISO 5210 / ISO 5211) and related national/interstate documents; the 2013 national document was prepared using earlier industry technical drafts.

Q: What are the key keywords?

A: Pipeline valves; actuator attachments; connecting dimensions; multi-turn; part-turn; actuator flange; valve interface; ISO 5210; ISO 5211.