ISO 10360-4-2000 cor1-2002 PDF

Full title and description

ISO 10360-4:2000/Cor 1:2002 — Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 4: CMMs used in scanning measuring mode — Technical Corrigendum 1. This document is a short technical corrigendum that applies to ISO 10360-4:2000 and provides corrections and clarifications specific to the scanning measuring mode test procedures and accompanying text.

Abstract

This corrigendum issues technical and editorial corrections to ISO 10360-4:2000 (the part of the ISO 10360 series that specifies acceptance and reverification tests for CMMs operating in scanning mode). It is brief (a corrigendum of a few pages) and was published to correct or clarify items in the original Part 4 text; the corrigendum itself has since been withdrawn when the ISO 10360 series was updated and consolidated.

General information

• Status: Withdrawn (corrigendum published and later withdrawn as the series was revised).
• Publication date: November 2002 (ISO record: 2002-11; ISO publication activity shows publication in mid-November 2002; European adoption/entry into EN occurred in December 2002).
• Publisher: International Organization for Standardization (ISO).
• ICS / categories: 17.040.30 (Measuring instruments / dimensional and geometrical product specification and verification).
• Edition / version: Edition 1 — Technical Corrigendum 1 (2002).
• Number of pages: 2 pages (corrigendum document).

Scope

The corrigendum applies specifically to ISO 10360-4:2000 and addresses corrections and clarifications for the acceptance and reverification tests defined for coordinate measuring machines used in scanning measuring mode. It does not replace the full Part 4 standard; rather, it amends or clarifies certain clauses, figures or notes in the Part 4 text. The ISO record also indicates that later revisions of the ISO 10360 series (including the 2020 work) supersede earlier parts.

Key topics and requirements

• Technical corrections to the wording and test descriptions of ISO 10360-4:2000 (scanning measuring mode).
• Clarifications intended to remove ambiguities in test procedures and definitions related to scanned measurement paths and data acquisition in scanning CMMs.
• Editorial fixes and alignment with related parts of the ISO 10360 series so measurement and acceptance criteria remain consistent across parts.
• Short corrigendum format — not a full revision; intended to be read alongside ISO 10360-4:2000.

Typical use and users

Users include CMM manufacturers, calibration and metrology laboratories, quality assurance engineers, and standards committees involved in dimensional metrology. The corrigendum is used by practitioners who reference ISO 10360-4:2000 to ensure they apply the corrected wording or procedures for scanning-mode acceptance and reverification tests.

Related standards

This corrigendum is part of the ISO 10360 series (Acceptance and reverification tests for coordinate measuring machines). It applies to ISO 10360-4:2000 and the ISO record shows the series was later updated (for example, consolidated/revised work leading to ISO 10360-5:2020 and related parts). Users should consult the current parts of ISO 10360 for up-to-date requirements (ISO records list ISO 10360-5:2020 as a later related edition).

Keywords

ISO 10360, corrigendum, CMM, coordinate measuring machine, scanning measuring mode, acceptance tests, reverification tests, GPS, metrology, ISO/TC 213.

FAQ

Q: What is this standard?

A: ISO 10360-4:2000/Cor 1:2002 is a Technical Corrigendum to ISO 10360-4:2000 (the part of ISO 10360 that covers CMMs used in scanning measuring mode). It provides corrections and clarifications to the original Part 4 text.

Q: What does it cover?

A: It covers technical/editorial corrections and clarifications to the test procedures and explanatory text in ISO 10360-4:2000 for acceptance and reverification testing of CMMs in scanning mode. It is not a full revision but must be read together with the original Part 4 document.

Q: Who typically uses it?

A: Manufacturers of coordinate measuring machines, calibration and metrology laboratories, QA and inspection engineers, and standards bodies involved in dimensional metrology and GPS (Geometrical Product Specifications).

Q: Is it current or superseded?

A: The corrigendum (and the original ISO 10360-4:2000) has been withdrawn in the course of later updates to the ISO 10360 family; later parts and consolidated revisions (for example the work published as ISO 10360-5:2020 and other updated parts) supersede or replace the earlier published material. Consult the latest ISO 10360 parts for the current requirements.

Q: Is it part of a series?

A: Yes — it is a corrigendum to Part 4 of the ISO 10360 series (Acceptance and reverification tests for CMMs). ISO 10360 is a multi-part series; users should check the other parts (Part 1 vocabulary, Part 2, Part 3, Part 4, Part 5, etc.) and the most recent revisions.

Q: What are the key keywords?

A: CMM, scanning measuring mode, acceptance tests, reverification tests, corrigendum, ISO 10360, geometrical product specifications (GPS), metrology.