ISO 10439-1-2015 PDF

Full title and description

ISO 10439-1:2015 — Petroleum, petrochemical and natural gas industries — Axial and centrifugal compressors and expander-compressors — Part 1: General requirements. This part of ISO 10439 specifies minimum requirements and gives recommendations for axial compressors, single-shaft and integrally geared process centrifugal compressors, and expander-compressors used for handling gas or process air in the petroleum, petrochemical and natural gas industries; it sets the general requirements that apply across the series.

Abstract

ISO 10439-1:2015 defines the general, minimum technical and documentation requirements for axial and centrifugal compressors and expander-compressors used in petroleum, petrochemical and natural gas service. It clarifies the intended scope and exclusions (for example, fans and low‑pressure blowers, certain packaged units and high‑temperature expanders) and indicates that Parts 2–4 address more specific machine types and additional requirements.

General information

• Status: Published.
• Publication date: February 2015 (ISO record shows 2015-02; corrected French version issued April 2015).
• Publisher: International Organization for Standardization (ISO).
• ICS / categories: 71.120.99 (Other equipment for the chemical industry); 75.180.20 (Processing equipment).
• Edition / version: Edition 1 (2015).
• Number of pages: 129 (ISO official record); national/adopted versions and vendor PDFs may show different page counts due to formatting (examples in vendor listings vary between ~129 and 140+ pages).

Scope

ISO 10439-1:2015 applies to axial compressors, single-shaft and integrally geared process centrifugal compressors, and expander-compressors used for special‑purpose applications handling gas or process air in the petroleum, petrochemical and natural gas industries. It establishes general requirements that are applicable to equipment covered by the other parts of the ISO 10439 series and specifies items that are outside its scope (notably fans, blowers with pressure rise under 34 kPa, packaged integrally geared plants and instrument air compressors, and hot gas expanders above certain temperatures). This part is intended to be used in conjunction with ISO 10439‑2, ‑3 and ‑4 as appropriate.

Key topics and requirements

• General design and construction requirements for axial and centrifugal compressors and expander-compressors used in process industries.
• Minimum performance, materials and mechanical integrity considerations relevant to process gas handling.
• Documentation, drawings, marking, and information to be supplied by manufacturers (design data, operating limits, maintenance instructions).
• Testing, inspection and acceptance criteria to verify compliance with specified requirements.
• Safety and exclusion notes (items not covered by this part, with references to API standards where applicable).
• Requirement to coordinate and apply Parts 2–4 of ISO 10439 for machine-specific rules and additional provisions.

Typical use and users

Used by compressor OEMs, rotating‑equipment design engineers, process and mechanical engineers in the oil & gas and petrochemical sectors, procurement/specification teams, inspection and testing bodies, and maintenance/operations groups to define minimum technical, testing and documentation requirements for axial and centrifugal compressors and expanders in process service.

Related standards

ISO 10439 is a multi‑part series; this part should be used together with ISO 10439‑2, ISO 10439‑3 and ISO 10439‑4 for machine‑specific requirements. The ISO text also notes related industry standards for certain excluded equipment (for example, API 672 and API 673 are referenced for specific packaged or fan/blower applications) and national/adopted versions such as EN ISO 10439‑1:2015.

Keywords

axial compressor, centrifugal compressor, expander-compressor, process compressors, petroleum industry, petrochemical, natural gas, general requirements, compressor design, compressor testing, ISO 10439.

FAQ

Q: What is this standard?

A: ISO 10439-1:2015 is the first part of the ISO 10439 series that defines general requirements for axial and centrifugal compressors and expander-compressors used in the petroleum, petrochemical and natural gas industries.

Q: What does it cover?

A: It covers minimum technical, documentation, testing and marking requirements that apply across the compressor types addressed by the series, and identifies equipment and situations that are excluded from this part (with pointers to other standards where appropriate).

Q: Who typically uses it?

A: Compressor manufacturers (OEMs), process and mechanical engineers, procurement/specification teams, inspection and testing organizations, and maintenance/operations personnel in oil, gas and petrochemical facilities.

Q: Is it current or superseded?

A: ISO 10439-1:2015 is the published edition from 2015; ISO records show it as the active Part 1 edition (published Feb 2015) and note a corrected French version from April 2015. Users should check official ISO or national bodies for any amendments, revisions or newer editions after 2015.

Q: Is it part of a series?

A: Yes — ISO 10439 is a multi-part standard. Part 1 contains general requirements; Parts 2, 3 and 4 provide further, machine-type specific requirements and should be applied together where relevant.

Q: What are the key keywords?

A: Axial compressor; centrifugal compressor; expander-compressor; process compressors; petroleum; petrochemical; natural gas; general requirements; testing; documentation.