ISO 11336-3-2019 PDF

Full title and description

ISO 11336-3:2019 — Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 3: Quality assurance, installation and in-service inspection. This part of ISO 11336 specifies requirements for product data sheets, conformity evaluation of laminated glazing supplied for yachts, labelling and identification, and methods for survey and inspection of installed glazing on large yachts.

Abstract

This standard defines the content of glazing product data sheets for use on yachts, procedures for evaluating conformity of laminated glass and laminated safety glass to those data sheets, labelling and identification methods for glass supplied for installation on board yachts, and methods for surveying and inspecting installed glazing. It does not address distortion of view or aesthetic aspects.

General information

• Status: Published (confirmed).
• Publication date: 19 June 2019 (ISO publication date: June 2019).
• Publisher: International Organization for Standardization (ISO).
• ICS / categories: 47.040 (Shipbuilding and related activities).
• Edition / version: Edition 1 (2019).
• Number of pages: 30 pages.

Details above are taken from the ISO bibliographic entry for ISO 11336-3:2019 and corroborating national catalogues.

Scope

ISO 11336-3:2019 applies to glazed openings on large yachts (as defined in the ISO 11336 series) and specifies the required content of product data sheets for glazing materials, criteria and methods for assessing conformity of laminated glass and laminated safety glass to those data sheets, labelling/identification requirements for glass supplied for installation on board, and survey and inspection techniques for installed glazing. The document excludes considerations of optical distortion and purely aesthetic aspects.

Key topics and requirements

• Content and required parameters of glazing product data sheets for yacht applications (material identification, mechanical properties, lamination details, limits of use).
• Procedures for evaluation of conformity of laminated glass and laminated safety glass to the product data sheet.
• Labelling and identification methods to ensure traceability of glazing supplied for installation on board.
• Methods and criteria for survey, installation inspection and in-service inspection of glazed openings to verify weathertightness, watertightness and installation quality.
• Quality-assurance provisions to support consistent supply and installation practices for marine glazing on large yachts.

Typical use and users

Primary users include yacht designers and naval architects, large-yacht builders and shipyards, glazing manufacturers and suppliers, marine glaziers and installers, classification societies and surveyors, technical inspectors, and owners/operators who require documented inspection and QA procedures for glazed openings. The standard is used to specify supplier product information, support procurement, and guide installation and in-service surveys.

Related standards

ISO 11336-3 is part of the ISO 11336 series for large-yacht glazed openings. Related parts include:

• ISO 11336-1 — Design criteria, materials, framing and testing of independent glazed openings (latest edition published in 2023).
• ISO 11336-2 — Glazed openings integrated into adjacent structure (elastically bonded) — design criteria, structural support, installation and testing (published 2020).
• National adoptions and identical standards such as BS ISO 11336-3:2019 (British adoption) reflect the same content for users in national markets.

Keywords

large yachts; glazed openings; laminated glass; laminated safety glass; weathertightness; watertightness; quality assurance; installation; in-service inspection; product data sheet; marine glazing; survey; labelling; traceability.

FAQ

Q: What is this standard?

A: ISO 11336-3:2019 is an international standard that specifies quality-assurance, installation and in-service inspection requirements for glazed openings on large yachts, including product data sheet content, conformity evaluation for laminated glazing, labelling and survey methods.

Q: What does it cover?

A: It covers the information required on glazing product data sheets, procedures to evaluate conformity of laminated glass and laminated safety glass to those data sheets, methods for labelling and identifying supplied glass, and techniques for surveying and inspecting installed glazing for weathertightness and watertightness. It does not address optical distortion or aesthetic issues.

Q: Who typically uses it?

A: Yacht designers, shipbuilders, glazing manufacturers and suppliers, marine installers, classification societies, surveyors and owners/operators of large yachts use this standard to ensure safe, traceable and conforming glazing installations.

Q: Is it current or superseded?

A: ISO's bibliographic record indicates ISO 11336-3:2019 was published in June 2019 and the entry was last reviewed and confirmed (remaining current) in the ISO lifecycle. Users should check with ISO or their national standards body for any amendments or later confirmations beyond this record.

Q: Is it part of a series?

A: Yes — ISO 11336 is a multipart series addressing glazed openings on large yachts. Relevant companion parts include ISO 11336-1 (design criteria, materials, framing and testing) and ISO 11336-2 (bonded glazed openings — design, support, installation and testing).

Q: What are the key keywords?

A: Key keywords are large yachts, glazed openings, laminated glass, weathertightness, watertightness, quality assurance, installation, inspection, product data sheet, labelling and traceability.