ISO 13628-8-2002 PDF
Name in English:
St ISO 13628-8-2002
Name in Russian:
Ст ISO 13628-8-2002
Original standard ISO 13628-8-2002 in PDF full version. Additional info + preview on request
Full title and description
ISO 13628-8:2002 — Petroleum and natural gas industries — Design and operation of subsea production systems — Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems. This part gives functional requirements and guidance for the selection, design and use of ROV interfaces on subsea production equipment to enable reliable interfacing and actuation by ROV-operated systems.
Abstract
Provides functional requirements and guidelines for ROV interfaces on subsea production systems. Applicable to selection and use of ROV interfaces, it offers design guidance and operational requirements to maximise the effectiveness of standard equipment and to ensure auditable, compatible interfaces and actuation for ROV intervention.
General information
- Status: Withdrawn (Edition 1, 2002).
- Publication date: December 2002 (Edition 1, 2002).
- Publisher: International Organization for Standardization (ISO).
- ICS / categories: 75.180.10 (Exploratory, drilling and extraction equipment).
- Edition / version: Edition 1 (2002); corrected by ISO 13628-8:2002/Cor 1:2005.
- Number of pages: 69 pages (first edition).
Scope
Specifies requirements and recommendations for design, selection and operation of interfaces that allow ROVs to manipulate, actuate or otherwise interact with subsea production equipment. The standard addresses mechanical, hydraulic and basic electrical/pneumatic interface considerations where relevant to ROV intervention, focusing on achieving repeatable, auditable and safe interfaces between ROV tools and subsea hardware.
Key topics and requirements
- Definitions and terminology for ROV interfaces and intervention equipment.
- Functional requirements for mechanical, hydraulic and actuation interfaces to be compatible with common ROV tooling.
- Design guidance to ensure reliable engagement, latching, actuation and release by ROVs.
- Operational guidance to maximise safety, maintainability and traceability of ROV-interfaced operations.
- Recommendations for marking, tolerances, clearances and interface verification to support repeatable operations.
- Considerations for environmental and subsea operational conditions (pressure, visibility, marine growth, access obstacles).
Typical use and users
Used by subsea equipment designers, ROV tool and system manufacturers, offshore operators, subsea intervention contractors, integrity and maintenance engineers, and classification societies to specify and verify ROV-compatible interfaces during design, procurement and operational planning.
Related standards
Part of the ISO 13628 series on subsea production systems (other parts include general requirements and recommendations, flexible pipe systems, through flowline systems, subsea wellhead and tree equipment, umbilicals, production control systems, completion/workover riser systems, ROT intervention systems and flexible pipe specifications). Relevant related parts include ISO 13628-1, -2, -3, -4, -5, -6, -7, -9, -10 and -11 among others in the series.
Keywords
ROV interfaces, subsea production systems, subsea intervention, remotely operated vehicle, subsea equipment design, actuation interfaces, ISO 13628, subsea standards.
FAQ
Q: What is this standard?
A: ISO 13628-8:2002 is an ISO part focused on requirements and guidance for ROV interfaces used on subsea production systems.
Q: What does it cover?
A: It covers functional requirements, design guidance and operational considerations for mechanical, hydraulic and related interfaces intended to be manipulated or actuated by ROVs on subsea production equipment.
Q: Who typically uses it?
A: Subsea equipment designers and manufacturers, ROV and intervention-tool vendors, offshore operators and intervention contractors, and conformity/inspection bodies use it when specifying or verifying ROV-compatible interfaces.
Q: Is it current or superseded?
A: ISO 13628-8:2002 is listed as withdrawn by ISO (first edition 2002). It was issued with a corrigendum in 2005; users should check the current national/sector adoption or any newer documents that replace or update the content.
Q: Is it part of a series?
A: Yes — it is one part of the multi-part ISO 13628 series that addresses design and operation of subsea production systems (other parts address flexible pipes, umbilicals, control systems, wellhead and trees, ROT systems, etc.).
Q: What are the key keywords?
A: ROV interfaces, subsea production, subsea intervention, actuation interfaces, remotely operated vehicle, ISO 13628.