DIN EN ISO 13628-5 2010-05 PDF

Full title and description

STB DIN EN ISO 13628-5 2010-05 — Petroleum and natural gas industries — Design and operation of subsea production systems — Part 5: Subsea umbilicals. This document is the German (DIN/EN) adoption of ISO 13628-5:2009 and provides requirements and recommendations for the design, material selection, manufacture, testing, installation and operation of subsea umbilicals and associated ancillary equipment for the petroleum and natural gas industries.

Abstract

This part of ISO 13628 specifies requirements and gives recommendations for subsea control systems and umbilicals used for chemical injection, gas lift, utilities and service functions. It applies to umbilicals containing electrical conductors, optical fibres, thermoplastic hoses and metallic tubes (alone or in combination) and covers static and dynamic service routings. Ancillary equipment is included only where it is permanently associated with the umbilical; topside hardware not permanently attached is excluded.

General information

• Status: DIN adoption listed as current/active (EN ISO adoption); note that the ISO original record for ISO 13628-5:2009 is shown as withdrawn on the ISO registry—see notes below.
• Publication date: DIN publication/adoption: 2010-05 (May 2010). Original ISO edition publication: 2009-12 (December 2009).
• Publisher: DIN (national adoption of EN ISO 13628-5:2009); original international publisher: ISO.
• ICS / categories: 75.180.10 (Petroleum and natural gas industries / Subsea production systems).
• Edition / version: DIN EN ISO 13628-5:2010-05 (based on ISO 13628-5:2009).
• Number of pages: Publisher/format dependent — ISO lists 168 pages for ISO 13628-5:2009 while the DIN/EN adoption record shows 188 pages for the DIN product record (different vendors/formats produce slightly different page counts).

Scope

The standard applies to subsea umbilicals and associated ancillary equipment used in the petroleum and natural gas industries. It covers design, material selection, manufacture, design verification, testing, installation and operational considerations for umbilicals containing electrical, optical, hydraulic and tubular components for static and dynamic applications and for surface-surface, surface-subsea and subsea-subsea routings. It excludes topside hardware that is not permanently attached to the umbilical above the topside hang-off termination.

Key topics and requirements

• Design principles and system requirements for subsea umbilicals (electrical, optical, hydraulic, tubular elements).
• Material selection and compatibility, including considerations for corrosion, pressure and temperature.
• Manufacturing, assembly and quality control requirements for umbilical construction.
• Design verification, testing procedures and acceptance criteria (factory and offshore tests).
• Installation guidance, routing options (surface-surface, surface-subsea, subsea-subsea) and hang-off/termination considerations.
• Operational requirements including maintenance, monitoring and integrity considerations for umbilical systems.
• Limitations and exclusions (e.g., certain tube sizes, voltage ratings and non-permanently attached topside hardware are out of scope as defined in the standard).

Typical use and users

Used by subsea system engineers, umbilical and cable manufacturers, offshore operators and asset owners, procurement teams, engineering consultancies, classification societies and regulatory bodies involved in design, procurement, installation and operation of subsea production control and service systems.

Related standards

Part of the ISO 13628 multi-part series covering subsea production systems (parts include general requirements, flexible pipe systems, through flowline systems, subsea wellhead and tree equipment, subsea umbilicals, subsea production control systems, riser systems, ROV interfaces, and others). Users commonly consult adjacent parts of ISO 13628 together with complementary standards (IEC and API documents) referenced for cables, electrical ratings and material tests.

Keywords

subsea umbilicals, umbilical design, subsea production systems, subsea control systems, chemical injection, gas lift, umbilical testing, material selection, installation, ISO 13628

FAQ

Q: What is this standard?

A: It is the German/EN adoption (STB DIN EN ISO 13628-5:2010-05) of ISO 13628-5:2009, providing requirements and recommendations for subsea umbilicals used in petroleum and natural gas operations.

Q: What does it cover?

A: Design, material selection, manufacture, verification testing, installation and operation of subsea umbilicals and associated ancillary equipment for control, chemical injection, gas lift, utility and service functions. Topside hardware not permanently attached to the umbilical is excluded.

Q: Who typically uses it?

A: Subsea engineers, umbilical and cable manufacturers, offshore operators, procurement teams, engineering consultants, classification societies and regulators for design specification, procurement, testing and operational readiness of umbilical systems.

Q: Is it current or superseded?

A: The EN/DIN adoption record for this document is dated May 2010 and is listed as the national/EN version; however, the ISO record for ISO 13628-5:2009 is shown in the ISO registry as withdrawn. Users should check the status with their national standards body or the latest ISO/EN catalogs before relying on the document for contract or regulatory compliance.

Q: Is it part of a series?

A: Yes — it is Part 5 of the ISO 13628 series (Design and operation of subsea production systems). Other parts cover general requirements, flexible pipes, flowlines, wellhead/tree equipment, production control systems, risers, ROV interfaces and more.

Q: What are the key keywords?

A: Subsea umbilicals, umbilical systems, subsea production, control systems, chemical injection, gas lift, umbilical installation, umbilical testing, ISO 13628-5.