SNT 3.06.03-2005 PDF

Full title and description

SNT 3.06.03-2005 — Automobile roads. Rules for performance and acceptance of works. (Russian title: СНТ 3.06.03-2005 — Автомобильные дороги. Правила производства и приемки работ.) This document sets out technical and procedural requirements for the organisation, execution and formal acceptance (handover) of road construction and repair works.

Abstract

This standard provides rules for planning, organising and carrying out construction, reconstruction and acceptance of automobile roads. It covers preparatory works, earthworks and pavement construction, drainage and ancillary works, quality control and testing, documentation and procedures for acceptance of completed works by the responsible authorities and client. The aim is to ensure consistent workmanship, safety and long-term performance of road assets.

General information

• Status: Active (document described as currently in force by available catalogues and suppliers).
• Publication date: 2005 (edition year indicated in designation: SNT 3.06.03-2005).
• Publisher: National technical standards series of Turkmenistan (SNT); documents of this series are published/approved through national construction/standards authorities (Ministry of Construction and Architecture / state standards bodies).
• ICS / categories: 93.080 — Road engineering (construction, materials, works and acceptance).
• Edition / version: Edition 2005 (SNT 3.06.03-2005).
• Number of pages: 83 pages (catalogue listings report 83 pages for the full document).

Scope

The standard applies to organisational and technical aspects of new construction, reconstruction and major repairs of public and departmental automobile roads (excluding temporary service roads and certain specialised test tracks). It specifies the sequence of works, requirements for site preparation, earthworks and embankments, pavement layers and surfacing, drainage, protective and finishing works, as well as acceptance procedures, required documentation and quality-control tests. Users should apply the standard together with other national SNT documents covering specific materials, pavement types and safety requirements.

Key topics and requirements

• Organisation of road-construction works, responsibilities of contractor and customer.
• Preparatory works: site clearing, temporary roads, utilities coordination.
• Earthworks and formation of roadbed: excavation, embankment construction, special conditions (peat, saline soils, permafrost, winter works).
• Pavement structure and surfacing: layer composition, compaction, asphalt and concrete pavement practices.
• Drainage, culverts and subgrade protection measures.
• Quality control and laboratory/field tests for materials and workmanship; acceptance criteria and tolerances.
• Documentation and procedures for intermediate and final acceptance (acts, certificates, as-built documentation).
• Safety, traffic management during works and requirements for permanent road markings/signage at handover.

These topic areas reflect the standard’s scope and are consistent with typical contents of national road works rules in the SNT/SNIP family.

Typical use and users

Primary users: road design offices, site contractors and subcontractors, site engineers, quality-control and testing laboratories, client/owner organisations and regulatory inspectors responsible for acceptance of road works. The standard is used to prepare work programmes, technical specifications for contracts, inspection checklists and acceptance documentation.

Related standards

Related documents in the same national framework include other SNT titles on pavements and earthworks (for example SNT 3.06.02-2000 — Asphalt concrete pavements in the cities of Turkmenistan) and SNT rules covering materials, testing and safety. Historical and regional predecessors include СНиП/SNiP 3.06.03 (1985) and similar road-construction rules used in the post‑Soviet space; users commonly apply those references where cross-references appear.

Keywords

automobile roads; road construction; acceptance of works; performance rules; pavement; earthworks; drainage; quality control; SNT; Turkmenistan; road engineering; ICS 93.080

FAQ

Q: What is this standard?

A: SNT 3.06.03-2005 is a national technical standard (SNT series) titled "Automobile roads. Rules for performance and acceptance of works" that specifies how road construction, reconstruction and acceptance should be organised and carried out.

Q: What does it cover?

A: It covers preparatory works, earthworks and roadbed construction, pavement layers and surfacing, drainage and ancillary works, quality control and laboratory/field tests, documentation and formal acceptance procedures for road projects.

Q: Who typically uses it?

A: Road designers, contractors, site engineers, material testing labs, clients/owners and regulatory/inspection bodies that plan, execute or accept road construction and major repair works.

Q: Is it current or superseded?

A: Catalogue listings and document suppliers list SNT 3.06.03-2005 as an active document (i.e., in current use in the SNT catalogue). Users should check the official national register or the issuing authority for the most up‑to‑date legal status and any amendments.

Q: Is it part of a series?

A: Yes — it is part of the SNT series (national technical standards) covering construction and engineering topics in Turkmenistan. It is normally applied together with other SNT documents dealing with pavements, materials, testing and safety.

Q: What are the key keywords?

A: Automobile roads; rules for performance and acceptance; road construction; pavement; earthworks; quality control; SNT; road engineering; acceptance procedures.